Материал: tvs2

Внимание! Если размещение файла нарушает Ваши авторские права, то обязательно сообщите нам

GENERAL DATA Ð 600 WATT PEAK POWER

V

Vin (TRANSIENT)

 

VL

Vin

td

tD = TIME DELAY DUE TO CAPACITIVE EFFECT t

Figure 4.

Vin (TRANSIENT)

V

OVERSHOOT DUE TO

INDUCTIVE EFFECTS

 

VL

t

Figure 5.

 

1

 

 

 

 

 

 

 

 

 

 

0.7

 

 

 

 

 

 

 

 

 

 

0.5

 

 

 

 

 

 

 

 

 

 

0.3

 

 

 

 

 

 

 

 

 

FACTOR

0.2

 

 

 

 

 

 

PULSE WIDTH

 

 

 

 

 

 

 

 

 

0.1

 

 

 

 

 

 

10 ms

 

 

 

 

 

 

 

 

 

 

 

DERATING

 

 

 

 

 

 

 

 

 

0.07

 

 

 

 

 

 

 

 

 

0.05

 

 

 

 

 

 

1 ms

 

 

 

 

 

 

 

 

 

 

 

0.03

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100 μs

 

 

 

0.02

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10 μs

 

 

 

 

0.01

0.2

0.5

1

2

5

10

20

50

100

 

0.1

 

 

 

 

 

D, DUTY CYCLE (%)

 

 

 

 

Figure 6. Typical Derating Factor for Duty Cycle

UL RECOGNITION

The entire series has Underwriters Laboratory Recognition for the classification of protectors (QVGV2) under the UL standard for safety 497B and File #116110. Many competitors only have one or two devices recognized or have recognition in a non-protective category. Some competitors have no recognition at all. With the UL497B recognition, our parts successfully passed several tests including Strike Voltage

Breakdown test, Endurance Conditioning, Temperature test, Dielectric Voltage-Withstand test, Discharge test and several more.

Whereas, some competitors have only passed a flammability test for the package material, we have been recognized for much more to be included in their Protector category.

600 Watt Peak Power Data Sheet

Motorola TVS/Zener Device Data

5-70

 

1SMB5.0AT3 through 1SMB170AT3

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted).

 

 

Breakdown Voltage*

 

Peak

Maximum

 

 

Reverse

 

 

Maximum

Pulse Current

Reverse Leakage

 

 

VBR @ IT

 

 

Stand-Off Voltage

Clamping Voltage

(See Figure 2)

@ VR

 

 

VR

Volts

mA

VC @ Ipp

Ipp

IR

Device

Device

Volts (1)

Min

Volts

Amps

μ

Marking

 

 

A

 

1SMB5.0AT3

5.0

6.40

10

9.2

65.2

800

KE

1SMB6.0AT3

6.0

6.67

10

10.3

58.3

800

KG

1SMB6.5AT3

6.5

7.22

10

11.2

53.6

500

KK

1SMB7.0AT3

7.0

7.78

10

12.0

50.0

200

KM

 

 

 

 

 

 

 

 

1SMB7.5AT3

7.5

8.33

1.0

12.9

46.5

100

KP

1SMB8.0AT3

8.0

8.89

1.0

13.6

44.1

50

KR

1SMB8.5AT3

8.5

9.44

1.0

14.4

41.7

10

KT

1SMB9.0AT3

9.0

10.0

1.0

15.4

39.0

5.0

KV

 

 

 

 

 

 

 

 

1SMB10AT3

10

11.1

1.0

17.0

35.3

5.0

KX

1SMB11AT3

11

12.2

1.0

18.2

33.0

5.0

KZ

1SMB12AT3

12

13.3

1.0

19.9

30.2

5.0

LE

1SMB13AT3

13

14.4

1.0

21.5

27.9

5.0

LG

 

 

 

 

 

 

 

 

1SMB14AT3

14

15.6

1.0

23.2

25.8

5.0

LK

1SMB15AT3

15

16.7

1.0

24.4

24.0

5.0

LM

1SMB16AT3

16

17.8

1.0

26.0

23.1

5.0

LP

1SMB17AT3

17

18.9

1.0

27.6

21.7

5.0

LR

 

 

 

 

 

 

 

 

1SMB18AT3

18

20.0

1.0

29.2

20.5

5.0

LT

1SMB20AT3

20

22.2

1.0

32.4

18.5

5.0

LV

1SMB22AT3

22

24.4

1.0

35.5

16.9

5.0

LX

1SMB24AT3

24

26.7

1.0

38.9

15.4

5.0

LZ

 

 

 

 

 

 

 

 

1SMB26AT3

26

28.9

1.0

42.1

14.2

5.0

ME

1SMB28AT3

28

31.1

1.0

45.4

13.2

5.0

MG

1SMB30AT3

30

33.3

1.0

48.4

12.4

5.0

MK

1SMB33AT3

33

36.7

1.0

53.3

11.3

5.0

MM

 

 

 

 

 

 

 

 

1SMB36AT3

36

40.0

1.0

58.1

10.3

5.0

MP

1SMB40AT3

40

44.4

1.0

64.5

9.3

5.0

MR

1SMB43AT3

43

47.8

1.0

69.4

8.6

5.0

MT

1SMB45AT3

45

50.0

1.0

72.7

8.3

5.0

MV

 

 

 

 

 

 

 

 

1SMB48AT3

48

53.3

1.0

77.4

7.7

5.0

MX

1SMB51AT3

51

56.7

1.0

82.4

7.3

5.0

MZ

1SMB54AT3

54

60.0

1.0

87.1

6.9

5.0

NE

1SMB58AT3

58

64.4

1.0

93.6

6.4

5.0

NG

 

 

 

 

 

 

 

 

1SMB60AT3

60

66.7

1.0

96.8

6.2

5.0

NK

1SMB64AT3

64

71.1

1.0

103

5.8

5.0

NM

1SMB70AT3

70

77.8

1.0

113

5.3

5.0

NP

1SMB75AT3

75

83.3

1.0

121

4.9

5.0

NR

 

 

 

 

 

 

 

 

1SMB78AT3

78

86.7

1.0

126

4.7

5.0

NT

1SMB85AT3

85

94.4

1.0

137

4.4

5.0

NV

1SMB90AT3

90

100

1.0

146

4.1

5.0

NX

1SMB100AT3

100

111

1.0

162

3.7

5.0

NZ

 

 

 

 

 

 

 

 

1SMB110AT3

110

122

1.0

177

3.4

5.0

PE

1SMB120AT3

120

133

1.0

193

3.1

5.0

PG

1SMB130AT3

130

144

1.0

209

2.9

5.0

PK

1SMB150AT3

150

167

1.0

243

2.5

5.0

PM

 

 

 

 

 

 

 

 

1SMB160AT3

160

178

1.0

259

2.3

5.0

PP

1SMB170AT3

170

189

1.0

275

2.2

5.0

PR

 

 

 

 

 

 

 

 

Note 1: A transient suppressor is normally selected according to the reverse ºStand Off Voltageº (V R) which should be equal to or greater than the DC or continuous peak operating voltage level.

*VBR measured at pulse test current IT at an ambient temperaure of 25°C.

Surge current waveform per Figure 2 and derate per Figure 3 of the General Data Ð 600 Watt at the beginning of this group. T3 suffix designates tape and reel of 2500 units.

ABBREVIATIONS AND SYMBOLS

VR

Stand Off Voltage. Applied reverse voltage to assure a

V(BR)min

non-conductive condition (See Note 1).

This is the minimum breakdown voltage the device will

 

exhibit and is used to assure that conduction does not

VC

occur prior to this voltage level at 25°C.

Maximum Clamping Voltage. The maximum peak volt-

 

age appearing across the transient suppressor when

Devices listed in bold, italic are Motorola preferred devices.

IPP PP IR

subjected to the peak pusle current in a one millisecond time interval. The peak pulse voltages are the combination of voltage rise due to both the series resistance and thermal rise.

Peak Pulse Current Ð See Figure 2 Peak Pulse Power

Reverse Leakage

Motorola TVS/Zener Device Data

600 Watt Peak Power Data Sheet

 

5-71

P6SMB6.8AT3 through P6SMB200AT3

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted).

 

 

Breakdown Voltage*

 

Peak

Maximum

 

 

Reverse

 

 

Maximum

Pulse Current

Reverse Leakage

 

 

VBR @ IT

 

 

Stand-Off Voltage

Clamping Voltage

(See Figure 2)

@ VR

 

 

VR

Volts

mA

VC @ Ipp

Ipp

IR

Device

Device

Volts (1)

Min

Volts

Amps

μ

Marking

 

 

A

 

1SMB10CAT3

10

11.1

1.0

17.0

35.3

5.0

KXC

1SMB11CAT3

11

12.2

1.0

18.2

33.0

5.0

KZC

1SMB12CAT3

12

13.3

1.0

19.9

30.2

5.0

LEC

1SMB13CAT3

13

14.4

1.0

21.5

27.9

5.0

LGC

 

 

 

 

 

 

 

 

1SMB14CAT3

14

15.6

1.0

23.2

25.8

5.0

LKC

1SMB15CAT3

15

16.7

1.0

24.4

24.0

5.0

LMC

1SMB16CAT3

16

17.8

1.0

26.0

23.1

5.0

LPC

1SMB17CAT3

17

18.9

1.0

27.6

21.7

5.0

LRC

 

 

 

 

 

 

 

 

1SMB18CAT3

18

20.0

1.0

29.2

20.5

5.0

LTC

1SMB20CAT3

20

22.2

1.0

32.4

18.5

5.0

LVC

1SMB22CAT3

22

24.4

1.0

35.5

16.9

5.0

LXC

1SMB24CAT3

24

26.7

1.0

38.9

15.4

5.0

LZC

 

 

 

 

 

 

 

 

1SMB26CAT3

26

28.9

1.0

42.1

14.2

5.0

MEC

1SMB28CAT3

28

31.1

1.0

45.4

13.2

5.0

MGC

1SMB30CAT3

30

33.3

1.0

48.4

12.4

5.0

MKC

1SMB33CAT3

33

36.7

1.0

53.3

11.3

5.0

MMC

 

 

 

 

 

 

 

 

1SMB36CAT3

36

40.0

1.0

58.1

10.3

5.0

MPC

1SMB40CAT3

40

44.4

1.0

64.5

9.3

5.0

MRC

1SMB43CAT3

43

47.8

1.0

69.4

8.6

5.0

MTC

1SMB45CAT3

45

50.0

1.0

72.7

8.3

5.0

MVC

 

 

 

 

 

 

 

 

1SMB48CAT3

48

53.3

1.0

77.4

7.7

5.0

MXC

1SMB51CAT3

51

56.7

1.0

82.4

7.3

5.0

MZC

1SMB54CAT3

54

60.0

1.0

87.1

6.9

5.0

NEC

1SMB58CAT3

58

64.4

1.0

93.6

6.4

5.0

NGC

 

 

 

 

 

 

 

 

1SMB60CAT3

60

66.7

1.0

96.8

6.2

5.0

NKC

1SMB64CAT3

64

71.1

1.0

103

5.8

5.0

NMC

1SMB70CAT3

70

77.8

1.0

113

5.3

5.0

NPC

1SMB75CAT3

75

83.3

1.0

121

4.9

5.0

NRC

 

 

 

 

 

 

 

 

1SMB78CAT3

78

86.7

1.0

126

4.7

5.0

NTC

 

 

 

 

 

 

 

 

Note 1: A transient suppressor is normally selected according to the reverse ºStand Off Voltageº (V R) which should be equal to or greater than the DC or continuous peak operating voltage level.

*VBR measured at pulse test current IT at an ambient temperaure of 25°C.

Surge current waveform per Figure 2 and derate per Figure 3 of the General Data Ð 600 Watt at the beginning of this group. T3 suffix designates tape and reel of 2500 units.

ABBREVIATIONS AND SYMBOLS

VR

Stand Off Voltage. Applied reverse voltage to assure a

 

non-conductive condition (See Note 1).

V(BR)min

This is the minimum breakdown voltage the device will

 

exhibit and is used to assure that conduction does not

 

occur prior to this voltage level at 25°C.

VC

Maximum Clamping Voltage. The maximum peak volt-

 

age appearing across the transient suppressor when

IPP PP IR

subjected to the peak pusle current in a one millisecond time interval. The peak pulse voltages are the combination of voltage rise due to both the series resistance and thermal rise.

Peak Pulse Current Ð See Figure 2 Peak Pulse Power

Reverse Leakage

Devices listed in bold, italic are Motorola preferred devices.

600 Watt Peak Power Data Sheet

Motorola TVS/Zener Device Data

5-72

 

1SMB10CAT3 through 1SMB78CAT3

Bi±Directional

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) VF = 3.5 V Max, IF** = 50 A for all types.

 

Breakdown Voltage*

Working

Maximum

Maximum

Maximum

 

 

 

Peak

Reverse

Reverse

Reverse Voltage

Maximum

 

 

 

VBR @ IT

 

Reverse

Leakage

Surge

@ IRSM

Temperature

 

 

 

Volts

 

Voltage

@ VRWM

Current

(Clamping Voltage)

Coefficient

Device

 

 

 

 

 

VRWM

IR

IRSM

VRSM

of VBR

Device

Min

Nom

Max

mA

Volts

μA

Amps

Volts

%/°C

Marking

 

 

 

 

 

 

 

 

 

 

 

P6SMB6.8AT3

6.45

6.8

7.14

10

5.8

1000

57

10.5

0.057

6V8A

P6SMB7.5AT3

7.13

7.5

7.88

10

6.4

500

53

11.3

0.061

7V5A

P6SMB8.2AT3

7.79

8.2

8.61

10

7.02

200

50

12.1

0.065

8V2A

P6SMB9.1AT3

8.65

9.1

9.55

1

7.78

50

45

13.4

0.068

9V1A

 

 

 

 

 

 

 

 

 

 

 

P6SMB10AT3

9.5

10

10.5

1

8.55

10

41

14.5

0.073

10A

P6SMB11AT3

10.5

11

11.6

1

9.4

5

38

15.6

0.075

11A

P6SMB12AT3

11.4

12

12.6

1

10.2

5

36

16.7

0.078

12A

P6SMB13AT3

12.4

13

13.7

1

11.1

5

33

18.2

0.081

13A

 

 

 

 

 

 

 

 

 

 

 

P6SMB15AT3

14.3

15

15.8

1

12.8

5

28

21.2

0.084

15A

P6SMB16AT3

15.2

16

16.8

1

13.6

5

27

22.5

0.086

16A

P6SMB18AT3

17.1

18

18.9

1

15.3

5

24

25.2

0.088

18A

P6SMB20AT3

19

20

21

1

17.1

5

22

27.7

0.09

20A

 

 

 

 

 

 

 

 

 

 

 

P6SMB22AT3

20.9

22

23.1

1

18.8

5

20

30.6

0.092

22A

P6SMB24AT3

22.8

24

25.2

1

20.5

5

18

33.2

0.094

24A

P6SMB27AT3

25.7

27

28.4

1

23.1

5

16

37.5

0.096

27A

P6SMB30AT3

28.5

30

31.5

1

25.6

5

14.4

41.4

0.097

30A

 

 

 

 

 

 

 

 

 

 

 

P6SMB33AT3

31.4

33

34.7

1

28.2

5

13.2

45.7

0.098

33A

P6SMB36AT3

34.2

36

37.8

1

30.8

5

12

49.9

0.099

36A

P6SMB39AT3

37.1

39

41

1

33.3

5

11.2

53.9

0.1

39A

P6SMB43AT3

40.9

43

45.2

1

36.8

5

10.1

59.3

0.101

43A

 

 

 

 

 

 

 

 

 

 

 

P6SMB47AT3

44.7

47

49.4

1

40.2

5

9.3

64.8

0.101

47A

P6SMB51AT3

48.5

51

53.6

1

43.6

5

8.6

70.1

0.102

51A

P6SMB56AT3

53.2

56

58.8

1

47.8

5

7.8

77

0.103

56A

P6SMB62AT3

58.9

62

65.1

1

53

5

7.1

85

0.104

62A

 

 

 

 

 

 

 

 

 

 

 

P6SMB68AT3

64.6

68

71.4

1

58.1

5

6.5

92

0.104

68A

P6SMB75AT3

71.3

75

78.8

1

64.1

5

5.8

103

0.105

75A

P6SMB82AT3

77.9

82

86.1

1

70.1

5

5.3

113

0.105

82A

P6SMB91AT3

86.5

91

95.5

1

77.8

5

4.8

125

0.106

91A

 

 

 

 

 

 

 

 

 

 

 

P6SMB100AT3

95

100

105

1

85.5

5

4.4

137

0.106

100A

P6SMB110AT3

105

110

116

1

94

5

4

152

0.107

110A

P6SMB120AT3

114

120

126

1

102

5

3.6

165

0.107

120A

P6SMB130AT3

124

130

137

1

111

5

3.3

179

0.107

130A

 

 

 

 

 

 

 

 

 

 

 

P6SMB150AT3

143

150

158

1

128

5

2.9

207

0.108

150A

P6SMB160AT3

152

160

168

1

136

5

2.7

219

0.108

160A

P6SMB170AT3

162

170

179

1

145

5

2.6

234

0.108

170A

P6SMB180AT3

171

180

189

1

154

5

2.4

246

0.108

180A

 

 

 

 

 

 

 

 

 

 

 

P6SMB200AT3

190

200

210

1

171

5

2.2

274

0.108

200A

*VBR measured at pulse test current IT at an ambient temperaure of 25°C.

** 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum.

Surge current waveform per Figure 2 and derate per Figure 3 of the General Data Ð 600 Watt at the beginning of this group.

T3 suffix designates tape and reel of 2500 units.

Devices listed in bold, italic are Motorola preferred devices.

Motorola TVS/Zener Device Data

600 Watt Peak Power Data Sheet

 

5-73

P6SMB11CAT3 through P6SMB91CAT3

Bi±Directional

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) VF = 3.5 V Max, IF** = 50 A for all types.

 

 

 

 

 

 

 

 

Maximum

 

 

 

Breakdown Voltage*

Working

Maximum

Maximum

Reverse Voltage

 

 

 

 

 

 

 

Peak

Reverse

Reverse

@ IRSM

Maximum

 

 

 

VBR @ IT

 

 

 

 

 

Reverse

Leakage

Surge

(Clamping

Temperature

 

 

 

Volts

 

Voltage

@ VRWM

Current

Voltage)

Coefficient

Device

 

 

 

 

 

VRWM

IR

IRSM

VRSM

of VBR

 

Min

Nom

Max

mA

Device

Volts

μA

Amps

Volts

%/°C

Marking

 

 

 

 

 

 

 

 

 

 

 

P6SMB11CAT3

10.5

11

11.6

1

9.4

5

38

15.6

0.075

11C

P6SMB12CAT3

11.4

12

12.6

1

10.2

5

36

16.7

0.078

12C

P6SMB13CAT3

12.4

13

13.7

1

11.1

5

33

18.2

0.081

13C

 

 

 

 

 

 

 

 

 

 

 

P6SMB15CAT3

14.3

15

15.8

1

12.8

5

28

21.2

0.084

15C

P6SMB16CAT3

15.2

16

16.8

1

13.6

5

27

22.5

0.086

16C

P6SMB18CAT3

17.1

18

18.9

1

15.3

5

24

25.2

0.088

18C

P6SMB20CAT3

19

20

21

1

17.1

5

22

27.7

0.09

20C

 

 

 

 

 

 

 

 

 

 

 

P6SMB22CAT3

20.9

22

23.1

1

18.8

5

20

30.6

0.092

22C

P6SMB24CAT3

22.8

24

25.2

1

20.5

5

18

33.2

0.094

24C

P6SMB27CAT3

25.7

27

28.4

1

23.1

5

16

37.5

0.096

27C

P6SMB30CAT3

28.5

30

31.5

1

25.6

5

14.4

41.4

0.097

30C

 

 

 

 

 

 

 

 

 

 

 

P6SMB33CAT3

31.4

33

34.7

1

28.2

5

13.2

45.7

0.098

33C

P6SMB36CAT3

34.2

36

37.8

1

30.8

5

12

49.9

0.099

36C

P6SMB39CAT3

37.1

39

41

1

33.3

5

11.2

53.9

0.1

39C

P6SMB43CAT3

40.9

43

45.2

1

36.8

5

10.1

59.3

0.101

43C

 

 

 

 

 

 

 

 

 

 

 

P6SMB47CAT3

44.7

47

49.4

1

40.2

5

9.3

64.8

0.101

47C

P6SMB51CAT3

48.5

51

53.6

1

43.6

5

8.6

70.1

0.102

51C

P6SMB56CAT3

53.2

56

58.8

1

47.8

5

7.8

77

0.103

56C

P6SMB62CAT3

58.9

62

65.1

1

53

5

7.1

85

0.104

62C

 

 

 

 

 

 

 

 

 

 

 

P6SMB68CAT3

64.6

68

71.4

1

58.1

5

6.5

92

0.104

68C

P6SMB75CAT3

71.3

75

78.8

1

64.1

5

5.8

103

0.105

75C

P6SMB82CAT3

77.9

82

86.1

1

70.1

5

5.3

113

0.105

82C

P6SMB91CAT3

86.5

91

95.5

1

77.8

5

4.8

125

0.106

91C

*VBR measured at pulse test current IT at an ambient temperaure of 25°C.

** 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum.

Surge current waveform per Figure 2 and derate per Figure 3 of the General Data Ð 600 Watt at the beginning of this group.

T3 suffix designates tape and reel of 2500 units.

600 Watt Peak Power Data Sheet

Motorola TVS/Zener Device Data

5-74

 

Источник: https://studfile.net/preview/16503427/